|
|
- ## Why does st not handle utmp entries?
-
- Use the excellent tool of [utmp](http://git.suckless.org/utmp/) for this task.
-
- ## Some _random program_ complains that st is unknown/not recognised/unsupported/whatever!
-
- It means that st doesn’t have any terminfo entry on your system. Chances are
- you did not `make install`. If you just want to test it without installing it,
- you can manualy run `tic -s st.info`.
-
- ## Nothing works, and nothing is said about an unknown terminal!
-
- * Some programs just assume they’re running in xterm i.e. they don’t rely on
- terminfo. What you see is the current state of the “xterm compliance”.
- * Some programs don’t complain about the lacking st description and default to
- another terminal. In that case see the question about terminfo.
-
- ## I get some weird glitches/visual bug on _random program_!
-
- Try launching it with a different TERM: $ TERM=xterm myapp. toe(1) will give
- you a list of available terminals, but you’ll most likely switch between xterm,
- st or st-256color. The default value for TERM can be changed in config.h
- (TNAME).
-
- ## How do I scroll back up?
-
- Using a terminal multiplexer.
-
- * `st -e tmux` using C-a [
- * `st -e screen` using C-a ESC
-
- ## Why doesn't the Del key work in some programs?
-
- Taken from the terminfo manpage:
-
- If the terminal has a keypad that transmits codes when the keys
- are pressed, this information can be given. Note that it is not
- possible to handle terminals where the keypad only works in
- local (this applies, for example, to the unshifted HP 2621 keys).
- If the keypad can be set to transmit or not transmit, tive these
- codes as smkx and rmkx. Otherwise the keypad is assumed to
- always transmit.
-
- In the st case smkx=E[?1hE= and rmkx=E[?1lE>, so it is mandatory that
- applications which want to test against keypad keys, have to send these
- sequences.
-
- But buggy applications like bash and irssi for example don't do this. A fast
- solution for them is to use the following command:
-
- $ printf "�33?1h�33=" >/dev/tty
-
- or
- $ echo $(tput smkx) >/dev/tty
-
- In the case of bash readline is used. Readline has a different note in its
- manpage about this issue:
-
- enable-keypad (Off)
- When set to On, readline will try to enable the
- application keypad when it is called. Some systems
- need this to enable arrow keys.
-
- Adding this option to your .inputrc will fix the keypad problem for all
- applications using readline.
-
- If you are using zsh, then read the zsh FAQ
- <http://zsh.sourceforge.net/FAQ/zshfaq03.html#l25>:
-
- It should be noted that the O / [ confusion can occur with other keys
- such as Home and End. Some systems let you query the key sequences
- sent by these keys from the system's terminal database, terminfo.
- Unfortunately, the key sequences given there typically apply to the
- mode that is not the one zsh uses by default (it's the "application"
- mode rather than the "raw" mode). Explaining the use of terminfo is
- outside of the scope of this FAQ, but if you wish to use the key
- sequences given there you can tell the line editor to turn on
- "application" mode when it starts and turn it off when it stops:
-
- function zle-line-init () { echoti smkx }
- function zle-line-finish () { echoti rmkx }
- zle -N zle-line-init
- zle -N zle-line-finish
-
- Putting these lines into your .zshrc will fix the problems.
|