Simple Terminal from SuckLess
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

466 lines
20 KiB

auto-sync: draw on idle to avoid flicker/tearing st could easily tear/flicker with animation or other unattended output. This commit eliminates most of the tear/flicker. Before this commit, the display timing had two "modes": - Interactively, st was waiting fixed `1000/xfps` ms after forwarding the kb/mouse event to the application and before drawing. - Unattended, and specifically with animations, the draw frequency was throttled to `actionfps`. Animation at a higher rate would throttle and likely tear, and at lower rates it was tearing big frames (specifically, when one `read` didn't get a full "frame"). The interactive behavior was decent, but it was impossible to get good unattended-draw behavior even with carefully chosen configuration. This commit changes the behavior such that it draws on idle instead of using fixed latency/frequency. This means that it tries to draw only when it's very likely that the application has completed its output (or after some duration without idle), so it mostly succeeds to avoid tear, flicker, and partial drawing. The config values minlatency/maxlatency replace xfps/actionfps and define the range which the algorithm is allowed to wait from the initial draw-trigger until the actual draw. The range enables the flexibility to choose when to draw - when least likely to flicker. It also unifies the interactive and unattended behavior and config values, which makes the code simpler as well - without sacrificing latency during interactive use, because typically interactively idle arrives very quickly, so the wait is typically minlatency. While it only slighly improves interactive behavior, for animations and other unattended-drawing it improves greatly, as it effectively adapts to any [animation] output rate without tearing, throttling, redundant drawing, or unnecessary delays (sounds impossible, but it works).
5 years ago
  1. /* See LICENSE file for copyright and license details. */
  2. /*
  3. * appearance
  4. *
  5. * font: see http://freedesktop.org/software/fontconfig/fontconfig-user.html
  6. */
  7. static char *font = "Liberation Mono:pixelsize=12:antialias=true:autohint=true";
  8. static int borderpx = 2;
  9. /*
  10. * What program is execed by st depends of these precedence rules:
  11. * 1: program passed with -e
  12. * 2: scroll and/or utmp
  13. * 3: SHELL environment variable
  14. * 4: value of shell in /etc/passwd
  15. * 5: value of shell in config.h
  16. */
  17. static char *shell = "/bin/sh";
  18. char *utmp = NULL;
  19. /* scroll program: to enable use a string like "scroll" */
  20. char *scroll = NULL;
  21. char *stty_args = "stty raw pass8 nl -echo -iexten -cstopb 38400";
  22. /* identification sequence returned in DA and DECID */
  23. char *vtiden = "\033[?6c";
  24. /* Kerning / character bounding-box multipliers */
  25. static float cwscale = 1.0;
  26. static float chscale = 1.0;
  27. /*
  28. * word delimiter string
  29. *
  30. * More advanced example: L" `'\"()[]{}"
  31. */
  32. wchar_t *worddelimiters = L" ";
  33. /* selection timeouts (in milliseconds) */
  34. static unsigned int doubleclicktimeout = 300;
  35. static unsigned int tripleclicktimeout = 600;
  36. /* alt screens */
  37. int allowaltscreen = 1;
  38. /*
  39. * draw latency range in ms - from new content/keypress/etc until drawing.
  40. * within this range, st draws when content stops arriving (idle). mostly it's
  41. * near minlatency, but it waits longer for slow updates to avoid partial draw.
  42. * low minlatency will tear/flicker more, as it can "detect" idle too early.
  43. */
  44. static double minlatency = 8;
  45. static double maxlatency = 33;
  46. /*
  47. * blinking timeout (set to 0 to disable blinking) for the terminal blinking
  48. * attribute.
  49. */
  50. static unsigned int blinktimeout = 800;
  51. /*
  52. * thickness of underline and bar cursors
  53. */
  54. static unsigned int cursorthickness = 2;
  55. /*
  56. * bell volume. It must be a value between -100 and 100. Use 0 for disabling
  57. * it
  58. */
  59. static int bellvolume = 0;
  60. /* default TERM value */
  61. char *termname = "st-256color";
  62. /*
  63. * spaces per tab
  64. *
  65. * When you are changing this value, don't forget to adapt the »it« value in
  66. * the st.info and appropriately install the st.info in the environment where
  67. * you use this st version.
  68. *
  69. * it#$tabspaces,
  70. *
  71. * Secondly make sure your kernel is not expanding tabs. When running `stty
  72. * -a` »tab0« should appear. You can tell the terminal to not expand tabs by
  73. * running following command:
  74. *
  75. * stty tabs
  76. */
  77. unsigned int tabspaces = 8;
  78. /* Terminal colors (16 first used in escape sequence) */
  79. static const char *colorname[] = {
  80. /* 8 normal colors */
  81. "black",
  82. "red3",
  83. "green3",
  84. "yellow3",
  85. "blue2",
  86. "magenta3",
  87. "cyan3",
  88. "gray90",
  89. /* 8 bright colors */
  90. "gray50",
  91. "red",
  92. "green",
  93. "yellow",
  94. "#5c5cff",
  95. "magenta",
  96. "cyan",
  97. "white",
  98. [255] = 0,
  99. /* more colors can be added after 255 to use with DefaultXX */
  100. "#cccccc",
  101. "#555555",
  102. };
  103. /*
  104. * Default colors (colorname index)
  105. * foreground, background, cursor, reverse cursor
  106. */
  107. unsigned int defaultfg = 7;
  108. unsigned int defaultbg = 0;
  109. static unsigned int defaultcs = 256;
  110. static unsigned int defaultrcs = 257;
  111. /*
  112. * Default shape of cursor
  113. * 2: Block ("")
  114. * 4: Underline ("_")
  115. * 6: Bar ("|")
  116. * 7: Snowman ("")
  117. */
  118. static unsigned int cursorshape = 2;
  119. /*
  120. * Default columns and rows numbers
  121. */
  122. static unsigned int cols = 80;
  123. static unsigned int rows = 24;
  124. /*
  125. * Default colour and shape of the mouse cursor
  126. */
  127. static unsigned int mouseshape = XC_xterm;
  128. static unsigned int mousefg = 7;
  129. static unsigned int mousebg = 0;
  130. /*
  131. * Color used to display font attributes when fontconfig selected a font which
  132. * doesn't match the ones requested.
  133. */
  134. static unsigned int defaultattr = 11;
  135. /*
  136. * Force mouse select/shortcuts while mask is active (when MODE_MOUSE is set).
  137. * Note that if you want to use ShiftMask with selmasks, set this to an other
  138. * modifier, set to 0 to not use it.
  139. */
  140. static uint forcemousemod = ShiftMask;
  141. /*
  142. * Internal mouse shortcuts.
  143. * Beware that overloading Button1 will disable the selection.
  144. */
  145. static MouseShortcut mshortcuts[] = {
  146. /* mask button function argument release */
  147. { XK_ANY_MOD, Button2, selpaste, {.i = 0}, 1 },
  148. { XK_ANY_MOD, Button4, ttysend, {.s = "\031"} },
  149. { XK_ANY_MOD, Button5, ttysend, {.s = "\005"} },
  150. };
  151. /* Internal keyboard shortcuts. */
  152. #define MODKEY Mod1Mask
  153. #define TERMMOD (ControlMask|ShiftMask)
  154. static Shortcut shortcuts[] = {
  155. /* mask keysym function argument */
  156. { XK_ANY_MOD, XK_Break, sendbreak, {.i = 0} },
  157. { ControlMask, XK_Print, toggleprinter, {.i = 0} },
  158. { ShiftMask, XK_Print, printscreen, {.i = 0} },
  159. { XK_ANY_MOD, XK_Print, printsel, {.i = 0} },
  160. { TERMMOD, XK_Prior, zoom, {.f = +1} },
  161. { TERMMOD, XK_Next, zoom, {.f = -1} },
  162. { TERMMOD, XK_Home, zoomreset, {.f = 0} },
  163. { TERMMOD, XK_C, clipcopy, {.i = 0} },
  164. { TERMMOD, XK_V, clippaste, {.i = 0} },
  165. { TERMMOD, XK_Y, selpaste, {.i = 0} },
  166. { ShiftMask, XK_Insert, selpaste, {.i = 0} },
  167. { TERMMOD, XK_Num_Lock, numlock, {.i = 0} },
  168. };
  169. /*
  170. * Special keys (change & recompile st.info accordingly)
  171. *
  172. * Mask value:
  173. * * Use XK_ANY_MOD to match the key no matter modifiers state
  174. * * Use XK_NO_MOD to match the key alone (no modifiers)
  175. * appkey value:
  176. * * 0: no value
  177. * * > 0: keypad application mode enabled
  178. * * = 2: term.numlock = 1
  179. * * < 0: keypad application mode disabled
  180. * appcursor value:
  181. * * 0: no value
  182. * * > 0: cursor application mode enabled
  183. * * < 0: cursor application mode disabled
  184. *
  185. * Be careful with the order of the definitions because st searches in
  186. * this table sequentially, so any XK_ANY_MOD must be in the last
  187. * position for a key.
  188. */
  189. /*
  190. * If you want keys other than the X11 function keys (0xFD00 - 0xFFFF)
  191. * to be mapped below, add them to this array.
  192. */
  193. static KeySym mappedkeys[] = { -1 };
  194. /*
  195. * State bits to ignore when matching key or button events. By default,
  196. * numlock (Mod2Mask) and keyboard layout (XK_SWITCH_MOD) are ignored.
  197. */
  198. static uint ignoremod = Mod2Mask|XK_SWITCH_MOD;
  199. /*
  200. * This is the huge key array which defines all compatibility to the Linux
  201. * world. Please decide about changes wisely.
  202. */
  203. static Key key[] = {
  204. /* keysym mask string appkey appcursor */
  205. { XK_KP_Home, ShiftMask, "\033[2J", 0, -1},
  206. { XK_KP_Home, ShiftMask, "\033[1;2H", 0, +1},
  207. { XK_KP_Home, XK_ANY_MOD, "\033[H", 0, -1},
  208. { XK_KP_Home, XK_ANY_MOD, "\033[1~", 0, +1},
  209. { XK_KP_Up, XK_ANY_MOD, "\033Ox", +1, 0},
  210. { XK_KP_Up, XK_ANY_MOD, "\033[A", 0, -1},
  211. { XK_KP_Up, XK_ANY_MOD, "\033OA", 0, +1},
  212. { XK_KP_Down, XK_ANY_MOD, "\033Or", +1, 0},
  213. { XK_KP_Down, XK_ANY_MOD, "\033[B", 0, -1},
  214. { XK_KP_Down, XK_ANY_MOD, "\033OB", 0, +1},
  215. { XK_KP_Left, XK_ANY_MOD, "\033Ot", +1, 0},
  216. { XK_KP_Left, XK_ANY_MOD, "\033[D", 0, -1},
  217. { XK_KP_Left, XK_ANY_MOD, "\033OD", 0, +1},
  218. { XK_KP_Right, XK_ANY_MOD, "\033Ov", +1, 0},
  219. { XK_KP_Right, XK_ANY_MOD, "\033[C", 0, -1},
  220. { XK_KP_Right, XK_ANY_MOD, "\033OC", 0, +1},
  221. { XK_KP_Prior, ShiftMask, "\033[5;2~", 0, 0},
  222. { XK_KP_Prior, XK_ANY_MOD, "\033[5~", 0, 0},
  223. { XK_KP_Begin, XK_ANY_MOD, "\033[E", 0, 0},
  224. { XK_KP_End, ControlMask, "\033[J", -1, 0},
  225. { XK_KP_End, ControlMask, "\033[1;5F", +1, 0},
  226. { XK_KP_End, ShiftMask, "\033[K", -1, 0},
  227. { XK_KP_End, ShiftMask, "\033[1;2F", +1, 0},
  228. { XK_KP_End, XK_ANY_MOD, "\033[4~", 0, 0},
  229. { XK_KP_Next, ShiftMask, "\033[6;2~", 0, 0},
  230. { XK_KP_Next, XK_ANY_MOD, "\033[6~", 0, 0},
  231. { XK_KP_Insert, ShiftMask, "\033[2;2~", +1, 0},
  232. { XK_KP_Insert, ShiftMask, "\033[4l", -1, 0},
  233. { XK_KP_Insert, ControlMask, "\033[L", -1, 0},
  234. { XK_KP_Insert, ControlMask, "\033[2;5~", +1, 0},
  235. { XK_KP_Insert, XK_ANY_MOD, "\033[4h", -1, 0},
  236. { XK_KP_Insert, XK_ANY_MOD, "\033[2~", +1, 0},
  237. { XK_KP_Delete, ControlMask, "\033[M", -1, 0},
  238. { XK_KP_Delete, ControlMask, "\033[3;5~", +1, 0},
  239. { XK_KP_Delete, ShiftMask, "\033[2K", -1, 0},
  240. { XK_KP_Delete, ShiftMask, "\033[3;2~", +1, 0},
  241. { XK_KP_Delete, XK_ANY_MOD, "\033[P", -1, 0},
  242. { XK_KP_Delete, XK_ANY_MOD, "\033[3~", +1, 0},
  243. { XK_KP_Multiply, XK_ANY_MOD, "\033Oj", +2, 0},
  244. { XK_KP_Add, XK_ANY_MOD, "\033Ok", +2, 0},
  245. { XK_KP_Enter, XK_ANY_MOD, "\033OM", +2, 0},
  246. { XK_KP_Enter, XK_ANY_MOD, "\r", -1, 0},
  247. { XK_KP_Subtract, XK_ANY_MOD, "\033Om", +2, 0},
  248. { XK_KP_Decimal, XK_ANY_MOD, "\033On", +2, 0},
  249. { XK_KP_Divide, XK_ANY_MOD, "\033Oo", +2, 0},
  250. { XK_KP_0, XK_ANY_MOD, "\033Op", +2, 0},
  251. { XK_KP_1, XK_ANY_MOD, "\033Oq", +2, 0},
  252. { XK_KP_2, XK_ANY_MOD, "\033Or", +2, 0},
  253. { XK_KP_3, XK_ANY_MOD, "\033Os", +2, 0},
  254. { XK_KP_4, XK_ANY_MOD, "\033Ot", +2, 0},
  255. { XK_KP_5, XK_ANY_MOD, "\033Ou", +2, 0},
  256. { XK_KP_6, XK_ANY_MOD, "\033Ov", +2, 0},
  257. { XK_KP_7, XK_ANY_MOD, "\033Ow", +2, 0},
  258. { XK_KP_8, XK_ANY_MOD, "\033Ox", +2, 0},
  259. { XK_KP_9, XK_ANY_MOD, "\033Oy", +2, 0},
  260. { XK_Up, ShiftMask, "\033[1;2A", 0, 0},
  261. { XK_Up, Mod1Mask, "\033[1;3A", 0, 0},
  262. { XK_Up, ShiftMask|Mod1Mask,"\033[1;4A", 0, 0},
  263. { XK_Up, ControlMask, "\033[1;5A", 0, 0},
  264. { XK_Up, ShiftMask|ControlMask,"\033[1;6A", 0, 0},
  265. { XK_Up, ControlMask|Mod1Mask,"\033[1;7A", 0, 0},
  266. { XK_Up,ShiftMask|ControlMask|Mod1Mask,"\033[1;8A", 0, 0},
  267. { XK_Up, XK_ANY_MOD, "\033[A", 0, -1},
  268. { XK_Up, XK_ANY_MOD, "\033OA", 0, +1},
  269. { XK_Down, ShiftMask, "\033[1;2B", 0, 0},
  270. { XK_Down, Mod1Mask, "\033[1;3B", 0, 0},
  271. { XK_Down, ShiftMask|Mod1Mask,"\033[1;4B", 0, 0},
  272. { XK_Down, ControlMask, "\033[1;5B", 0, 0},
  273. { XK_Down, ShiftMask|ControlMask,"\033[1;6B", 0, 0},
  274. { XK_Down, ControlMask|Mod1Mask,"\033[1;7B", 0, 0},
  275. { XK_Down,ShiftMask|ControlMask|Mod1Mask,"\033[1;8B",0, 0},
  276. { XK_Down, XK_ANY_MOD, "\033[B", 0, -1},
  277. { XK_Down, XK_ANY_MOD, "\033OB", 0, +1},
  278. { XK_Left, ShiftMask, "\033[1;2D", 0, 0},
  279. { XK_Left, Mod1Mask, "\033[1;3D", 0, 0},
  280. { XK_Left, ShiftMask|Mod1Mask,"\033[1;4D", 0, 0},
  281. { XK_Left, ControlMask, "\033[1;5D", 0, 0},
  282. { XK_Left, ShiftMask|ControlMask,"\033[1;6D", 0, 0},
  283. { XK_Left, ControlMask|Mod1Mask,"\033[1;7D", 0, 0},
  284. { XK_Left,ShiftMask|ControlMask|Mod1Mask,"\033[1;8D",0, 0},
  285. { XK_Left, XK_ANY_MOD, "\033[D", 0, -1},
  286. { XK_Left, XK_ANY_MOD, "\033OD", 0, +1},
  287. { XK_Right, ShiftMask, "\033[1;2C", 0, 0},
  288. { XK_Right, Mod1Mask, "\033[1;3C", 0, 0},
  289. { XK_Right, ShiftMask|Mod1Mask,"\033[1;4C", 0, 0},
  290. { XK_Right, ControlMask, "\033[1;5C", 0, 0},
  291. { XK_Right, ShiftMask|ControlMask,"\033[1;6C", 0, 0},
  292. { XK_Right, ControlMask|Mod1Mask,"\033[1;7C", 0, 0},
  293. { XK_Right,ShiftMask|ControlMask|Mod1Mask,"\033[1;8C",0, 0},
  294. { XK_Right, XK_ANY_MOD, "\033[C", 0, -1},
  295. { XK_Right, XK_ANY_MOD, "\033OC", 0, +1},
  296. { XK_ISO_Left_Tab, ShiftMask, "\033[Z", 0, 0},
  297. { XK_Return, Mod1Mask, "\033\r", 0, 0},
  298. { XK_Return, XK_ANY_MOD, "\r", 0, 0},
  299. { XK_Insert, ShiftMask, "\033[4l", -1, 0},
  300. { XK_Insert, ShiftMask, "\033[2;2~", +1, 0},
  301. { XK_Insert, ControlMask, "\033[L", -1, 0},
  302. { XK_Insert, ControlMask, "\033[2;5~", +1, 0},
  303. { XK_Insert, XK_ANY_MOD, "\033[4h", -1, 0},
  304. { XK_Insert, XK_ANY_MOD, "\033[2~", +1, 0},
  305. { XK_Delete, ControlMask, "\033[M", -1, 0},
  306. { XK_Delete, ControlMask, "\033[3;5~", +1, 0},
  307. { XK_Delete, ShiftMask, "\033[2K", -1, 0},
  308. { XK_Delete, ShiftMask, "\033[3;2~", +1, 0},
  309. { XK_Delete, XK_ANY_MOD, "\033[P", -1, 0},
  310. { XK_Delete, XK_ANY_MOD, "\033[3~", +1, 0},
  311. { XK_BackSpace, XK_NO_MOD, "\177", 0, 0},
  312. { XK_BackSpace, Mod1Mask, "\033\177", 0, 0},
  313. { XK_Home, ShiftMask, "\033[2J", 0, -1},
  314. { XK_Home, ShiftMask, "\033[1;2H", 0, +1},
  315. { XK_Home, XK_ANY_MOD, "\033[H", 0, -1},
  316. { XK_Home, XK_ANY_MOD, "\033[1~", 0, +1},
  317. { XK_End, ControlMask, "\033[J", -1, 0},
  318. { XK_End, ControlMask, "\033[1;5F", +1, 0},
  319. { XK_End, ShiftMask, "\033[K", -1, 0},
  320. { XK_End, ShiftMask, "\033[1;2F", +1, 0},
  321. { XK_End, XK_ANY_MOD, "\033[4~", 0, 0},
  322. { XK_Prior, ControlMask, "\033[5;5~", 0, 0},
  323. { XK_Prior, ShiftMask, "\033[5;2~", 0, 0},
  324. { XK_Prior, XK_ANY_MOD, "\033[5~", 0, 0},
  325. { XK_Next, ControlMask, "\033[6;5~", 0, 0},
  326. { XK_Next, ShiftMask, "\033[6;2~", 0, 0},
  327. { XK_Next, XK_ANY_MOD, "\033[6~", 0, 0},
  328. { XK_F1, XK_NO_MOD, "\033OP" , 0, 0},
  329. { XK_F1, /* F13 */ ShiftMask, "\033[1;2P", 0, 0},
  330. { XK_F1, /* F25 */ ControlMask, "\033[1;5P", 0, 0},
  331. { XK_F1, /* F37 */ Mod4Mask, "\033[1;6P", 0, 0},
  332. { XK_F1, /* F49 */ Mod1Mask, "\033[1;3P", 0, 0},
  333. { XK_F1, /* F61 */ Mod3Mask, "\033[1;4P", 0, 0},
  334. { XK_F2, XK_NO_MOD, "\033OQ" , 0, 0},
  335. { XK_F2, /* F14 */ ShiftMask, "\033[1;2Q", 0, 0},
  336. { XK_F2, /* F26 */ ControlMask, "\033[1;5Q", 0, 0},
  337. { XK_F2, /* F38 */ Mod4Mask, "\033[1;6Q", 0, 0},
  338. { XK_F2, /* F50 */ Mod1Mask, "\033[1;3Q", 0, 0},
  339. { XK_F2, /* F62 */ Mod3Mask, "\033[1;4Q", 0, 0},
  340. { XK_F3, XK_NO_MOD, "\033OR" , 0, 0},
  341. { XK_F3, /* F15 */ ShiftMask, "\033[1;2R", 0, 0},
  342. { XK_F3, /* F27 */ ControlMask, "\033[1;5R", 0, 0},
  343. { XK_F3, /* F39 */ Mod4Mask, "\033[1;6R", 0, 0},
  344. { XK_F3, /* F51 */ Mod1Mask, "\033[1;3R", 0, 0},
  345. { XK_F3, /* F63 */ Mod3Mask, "\033[1;4R", 0, 0},
  346. { XK_F4, XK_NO_MOD, "\033OS" , 0, 0},
  347. { XK_F4, /* F16 */ ShiftMask, "\033[1;2S", 0, 0},
  348. { XK_F4, /* F28 */ ControlMask, "\033[1;5S", 0, 0},
  349. { XK_F4, /* F40 */ Mod4Mask, "\033[1;6S", 0, 0},
  350. { XK_F4, /* F52 */ Mod1Mask, "\033[1;3S", 0, 0},
  351. { XK_F5, XK_NO_MOD, "\033[15~", 0, 0},
  352. { XK_F5, /* F17 */ ShiftMask, "\033[15;2~", 0, 0},
  353. { XK_F5, /* F29 */ ControlMask, "\033[15;5~", 0, 0},
  354. { XK_F5, /* F41 */ Mod4Mask, "\033[15;6~", 0, 0},
  355. { XK_F5, /* F53 */ Mod1Mask, "\033[15;3~", 0, 0},
  356. { XK_F6, XK_NO_MOD, "\033[17~", 0, 0},
  357. { XK_F6, /* F18 */ ShiftMask, "\033[17;2~", 0, 0},
  358. { XK_F6, /* F30 */ ControlMask, "\033[17;5~", 0, 0},
  359. { XK_F6, /* F42 */ Mod4Mask, "\033[17;6~", 0, 0},
  360. { XK_F6, /* F54 */ Mod1Mask, "\033[17;3~", 0, 0},
  361. { XK_F7, XK_NO_MOD, "\033[18~", 0, 0},
  362. { XK_F7, /* F19 */ ShiftMask, "\033[18;2~", 0, 0},
  363. { XK_F7, /* F31 */ ControlMask, "\033[18;5~", 0, 0},
  364. { XK_F7, /* F43 */ Mod4Mask, "\033[18;6~", 0, 0},
  365. { XK_F7, /* F55 */ Mod1Mask, "\033[18;3~", 0, 0},
  366. { XK_F8, XK_NO_MOD, "\033[19~", 0, 0},
  367. { XK_F8, /* F20 */ ShiftMask, "\033[19;2~", 0, 0},
  368. { XK_F8, /* F32 */ ControlMask, "\033[19;5~", 0, 0},
  369. { XK_F8, /* F44 */ Mod4Mask, "\033[19;6~", 0, 0},
  370. { XK_F8, /* F56 */ Mod1Mask, "\033[19;3~", 0, 0},
  371. { XK_F9, XK_NO_MOD, "\033[20~", 0, 0},
  372. { XK_F9, /* F21 */ ShiftMask, "\033[20;2~", 0, 0},
  373. { XK_F9, /* F33 */ ControlMask, "\033[20;5~", 0, 0},
  374. { XK_F9, /* F45 */ Mod4Mask, "\033[20;6~", 0, 0},
  375. { XK_F9, /* F57 */ Mod1Mask, "\033[20;3~", 0, 0},
  376. { XK_F10, XK_NO_MOD, "\033[21~", 0, 0},
  377. { XK_F10, /* F22 */ ShiftMask, "\033[21;2~", 0, 0},
  378. { XK_F10, /* F34 */ ControlMask, "\033[21;5~", 0, 0},
  379. { XK_F10, /* F46 */ Mod4Mask, "\033[21;6~", 0, 0},
  380. { XK_F10, /* F58 */ Mod1Mask, "\033[21;3~", 0, 0},
  381. { XK_F11, XK_NO_MOD, "\033[23~", 0, 0},
  382. { XK_F11, /* F23 */ ShiftMask, "\033[23;2~", 0, 0},
  383. { XK_F11, /* F35 */ ControlMask, "\033[23;5~", 0, 0},
  384. { XK_F11, /* F47 */ Mod4Mask, "\033[23;6~", 0, 0},
  385. { XK_F11, /* F59 */ Mod1Mask, "\033[23;3~", 0, 0},
  386. { XK_F12, XK_NO_MOD, "\033[24~", 0, 0},
  387. { XK_F12, /* F24 */ ShiftMask, "\033[24;2~", 0, 0},
  388. { XK_F12, /* F36 */ ControlMask, "\033[24;5~", 0, 0},
  389. { XK_F12, /* F48 */ Mod4Mask, "\033[24;6~", 0, 0},
  390. { XK_F12, /* F60 */ Mod1Mask, "\033[24;3~", 0, 0},
  391. { XK_F13, XK_NO_MOD, "\033[1;2P", 0, 0},
  392. { XK_F14, XK_NO_MOD, "\033[1;2Q", 0, 0},
  393. { XK_F15, XK_NO_MOD, "\033[1;2R", 0, 0},
  394. { XK_F16, XK_NO_MOD, "\033[1;2S", 0, 0},
  395. { XK_F17, XK_NO_MOD, "\033[15;2~", 0, 0},
  396. { XK_F18, XK_NO_MOD, "\033[17;2~", 0, 0},
  397. { XK_F19, XK_NO_MOD, "\033[18;2~", 0, 0},
  398. { XK_F20, XK_NO_MOD, "\033[19;2~", 0, 0},
  399. { XK_F21, XK_NO_MOD, "\033[20;2~", 0, 0},
  400. { XK_F22, XK_NO_MOD, "\033[21;2~", 0, 0},
  401. { XK_F23, XK_NO_MOD, "\033[23;2~", 0, 0},
  402. { XK_F24, XK_NO_MOD, "\033[24;2~", 0, 0},
  403. { XK_F25, XK_NO_MOD, "\033[1;5P", 0, 0},
  404. { XK_F26, XK_NO_MOD, "\033[1;5Q", 0, 0},
  405. { XK_F27, XK_NO_MOD, "\033[1;5R", 0, 0},
  406. { XK_F28, XK_NO_MOD, "\033[1;5S", 0, 0},
  407. { XK_F29, XK_NO_MOD, "\033[15;5~", 0, 0},
  408. { XK_F30, XK_NO_MOD, "\033[17;5~", 0, 0},
  409. { XK_F31, XK_NO_MOD, "\033[18;5~", 0, 0},
  410. { XK_F32, XK_NO_MOD, "\033[19;5~", 0, 0},
  411. { XK_F33, XK_NO_MOD, "\033[20;5~", 0, 0},
  412. { XK_F34, XK_NO_MOD, "\033[21;5~", 0, 0},
  413. { XK_F35, XK_NO_MOD, "\033[23;5~", 0, 0},
  414. };
  415. /*
  416. * Selection types' masks.
  417. * Use the same masks as usual.
  418. * Button1Mask is always unset, to make masks match between ButtonPress.
  419. * ButtonRelease and MotionNotify.
  420. * If no match is found, regular selection is used.
  421. */
  422. static uint selmasks[] = {
  423. [SEL_RECTANGULAR] = Mod1Mask,
  424. };
  425. /*
  426. * Printable characters in ASCII, used to estimate the advance width
  427. * of single wide characters.
  428. */
  429. static char ascii_printable[] =
  430. " !\"#$%&'()*+,-./0123456789:;<=>?"
  431. "@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\\]^_"
  432. "`abcdefghijklmnopqrstuvwxyz{|}~";