- Shift + End : Delete until end of line.
    - Control + End : Delete until end of screen.

When  the End  key is  pressed  without any  modifier is  not generated  the
correct sequence for it  (going to the end of the  screen), because the size
of the  terminal is not known,  so it is  not possible write a  sequence for
this purpouse.
---
 config.def.h |   10 ++++++++--
 st.info      |    2 ++
 2 files changed, 10 insertions(+), 2 deletions(-)

Del : Delete character under cursor.
    Shift + Del : Delete the line under cursor.
    Ctrl + Del: Delete the full screen.
---
 config.def.h |   16 ++++++++++++----
 st.info      |    2 ++
 2 files changed, 14 insertions(+), 4 deletions(-)

Insert key stands for a key which allows enter or leaves insert mode, so let
it generates the correct sequence to change between these modes:

   - Insert: Enter in insert mode.
   - Shift + Insert: Leave insert mode (replace mode).
   - Control + Insert: Insert a blank line.

Like Shift + Insert also paste text, if a user want this feature be full
functional he has to modify such shortcut.
---
 config.def.h |   16 ++++++++++++----
 st.info      |    3 +++
 2 files changed, 15 insertions(+), 4 deletions(-)

ka1 stands for upper left of keypad, so the correct value is the one
generated by Home in application keypad mode.
---
 st.info |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

xft/fontcache.

Keypad will generate keycodes when keypad application mode is enabled. It
can cause problems with some programs like vi, which operates in such
mode.

This patch change by default don't generate the keycodes never, but this
behaviour can be changed using the combination Alt + NumLock.
---
 config.def.h |   34 ++++++++++++++++++----------------
 st.c         |   17 +++++++++++++++--
 2 files changed, 33 insertions(+), 18 deletions(-)

The commit 'Fixing some key issues with mc' fix the problem where mc didn't
recognize home key because the generated code and the terminfo entry were
different (terminfo khome = \E[1~ but generates \033[H).

Home key in ansi mode should generate the sequence CUP (\033[H) to 0,0 (home
position), but it is also interesting generate a application code which
identifies the key. Real vt520 only generates the ansi sequence CUP, linux
console generates only the application code \033[1~, xterm generates CUP in
ansi mode and \033OH in cursor application mode, rxvt only generates the
application code \033[7~.

This patch sets CUP in ansi mode and \033[1~ in cursor application mode, so
it can be used in both modes and the application mode value is similar to
near values (insert = \033[2~, Prior = \033[5~, Next = \033[6~, End =
\033[4~, Supr = \033[3).
---
 config.def.h |    7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

a bit. Thanks nsz!

---
 st.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

---
 st.c |    4 ----
 1 file changed, 4 deletions(-)

remap other keys.

This patch apply the same code for shortcuts that it is used now for defined
keys. So it is possible use now XK_NO_MOD and XK_ANY_MOD for defining shortcuts.
---
 st.c |   35 ++++++++++++++++++++---------------
 1 file changed, 20 insertions(+), 15 deletions(-)

some minor style changes.

Usually terminal emulators don't generate any sequence for a combination
they don't have registered, for example Shift + Next, but st behavior
previous to the keyboard patch generates the sequence without the modifier,
in this example Next. This patch uses the XK_ANY_MOD in order to get this
same behaviour.
---
 config.def.h |  114 ++++++++++++++++++++++++++++++----------------------------
 1 file changed, 59 insertions(+), 55 deletions(-)

XK_NO_MOD match a key without modifiers and XK_ANY_MOD match a key does not
matter what modifiers are pressed to. Like they are mask the best value for
XK_ANY_MOD is all the bits to 1, so the and with any state will be equal to
the state. This also imply that is necessary check the case for XK_NO_MOD
(no modifiers at all) with some modifier in state, and the inverse
(some mask different to XK_ANY_MOD or XK_NO_MOD and no modifiers in state).
---
 st.c |   12 +++++++-----
 1 file changed, 7 insertions(+), 5 deletions(-)

When Shift + Tab is pressed X server send the event XK_ISO_Left_Tab with
ShiftMask, so this is the entry we need in config.def.h

This patch also revert the previous patch for this issue because it breaks
the keyboard.
---
 config.def.h |    2 +-
 st.c         |    2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

This patch adds the keys for the keypad (in both modes, application mode or
ansi mode) and function keys. It uses the same convention than xterm and
instead of using the XK_Fxx values it generates them using F1-F12 and
modifiers. For example:

   F1 -> ^[OP
   F1 + Shift = F13 -> ^[[1;2P
   F1 + Control = F25 -> ^[[1;5P
   F1 + Mod2 = F37 -> ^[[1;6P
   F1 + Mod1 = F49 -> ^[[1;3P
   F1 + Mod3 = F61 -> ^[[1;4P

It is also important notice than the terminfo capability kIC (shifted insert
key) only can be generated using the keypad keyboard, because the shorcut
for selection paste is using the same combination.

After this path the number of elements in the Key array becomes high, and
maybe a sequencial search is not enough efficient now.
---
 TODO         |    6 +---
 config.def.h |  102 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++-
 st.info      |   70 ++++++++++++++++++++++++++++++++++++++--
 3 files changed, 169 insertions(+), 9 deletions(-)

Since there isn't any terminfo capability for control and meta modifiers for
arrows keys it is necessary use the same that almost terminal emulators use,
because there are a lot of programs which have these codes hardcoded.

This cause also that shift combinations are also changed, but in this case
this is not a problem since there are terminfo capabilities for them. After
this patch shift-up and shift-down continue not working in emacs with
TERM=st, but they work with TERM=xterm, so it is possible some other changes
are necessary in the terminfo entry.
---
 config.def.h |   16 ++++++++++++----
 st.info      |    8 ++++----
 2 files changed, 16 insertions(+), 8 deletions(-)

Usually the arrow keys generate the ANSI sequence which terminal will
understand like a movement, so it is not necessary any dealing for them, the
program can not know if the sequence is generate for a echo key or directly
from the program. If you need really know if the key was pressed then you
need activate the keypad mode where the keys will generate a special code
for each keypad key.

The terminfo capabilities kcub1, kcud1, kcuf1 and kcuu1 are used for this
keypad code, not for the sequence generate in the ansi mode.
---
 st.info |    8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

Some keys were in the Key array while others were hardcoded in
kpress().This cause some problems with some keys which can generate more of
one string based in the configuration of the terminal.
---
 config.def.h |   70 ++++++++++++++++++++++++++++++++++++++++-----------------
 st.c         |   71 +++++++++++++++++++++++++---------------------------------
 2 files changed, 79 insertions(+), 62 deletions(-)

Shift + Insert is used like a hot key for paste the selection, so it is more
logical move it to shortcut array instead of having special code for it.
---
 config.def.h |    1 +
 st.c         |   13 +++----------
 2 files changed, 4 insertions(+), 10 deletions(-)