Use the terminfo delay syntax ($<x>) in our flash capability to avoid
hardcoding a fixed delay in redraw() when called from tsetmode() with
DECSCNM.
We need to turn on the npc capability so that delays are made with
xon/xoff instead of padding characters.

CC by default is cc, so the assignment was doing nothing, but
it was using non standard syntax, so some system (NetBSD) fail
to compile.

if you keep downsizing your fontsize until either xw.ch or xw.cw gets 0,
st crashes, because there is an unchecked division in cresize.

When MODE_INSERT is set we'd shift characters on the same
line forward before inserting our character in tputc().
This did not account for wide characters where width != 1.
This patch makes it so we shift the correct amount.

In tputc(), when a character wasn't large enough to fit
on the current line, we would call tnewline() to place it on
the next line. Unfortunately, we weren't resetting our glyph
pointer and this caused memory corruption when a
wide character (width == 2) was being written. This patch
resets our glyph pointer after calls to tnewline().

If blinktimeout is set to a value greater than 1000, pselect will
receive a timeout argument with tv_nsec greater than 1E9 (1 sec), and
fail, making st crash. This patch just ensures that the timespec
structure is correctly filled with a value properly decomposed between
tv_sec and tv_nsec.

Reported by JasonWoof on IRC. Thanks!

Trailing whitespaces are trimmed when copying from normal selection and
rectangular selection on lines that have their last character included
or on the left of the selection. It leads to inconsistent behaviors when
copying the exact same text from the left and right window in
applications with vertical splits.
This patch solves this issue by always trimming the selection.

exit() will also unwind the atexit() functions.  This is bad
because if exec*() fails the process is in an inconsistent state.

- POSIX states the SHELL environment variable "... shall represent a
  pathname of the user's preferred command language interpreter." As
  such, st should check for its presence when deciding what shell to
  use; just as HOME can be defined to override one's passwd-defined home
  directory, a user should also be able to override their passwd-defined
  shell using the SHELL environment variable.

Helpful when new Unicode codepoints are not recognized by libc.

I'd like to let st run with its own window when trying to embed it to a window with id 0 instead of exiting with an error.

These are needed by ncurses to correctly handle the switch between line
drawing. The changes to the alternative characterset code already fixed the
urwid hack.

SHELL must be set to the SHELL of the user, but it was possible set
it to utmp.

The XBell() call currently used when a bell is recieved sends a message
to the X server, but if the X server doesn't know how to sound it,
it just gets ignored and I have not been able to find anywhere in x.org's
code a way to configure the action that the server does.

However, if you use XkbBell() then you can have a process listening for
the XkbBellNotifyEvent that is produced and either alert you visually or
play an audio file or whatever you want as your notification. You have
to include one more header file but the function seems to be compiled as
part of Xlib, at least on my installation.

CustaiCo

St has enacs, which must be printed if a program requires to use
the alternate charset (graphic charset), that in st case was to
select charset graphic for G1, but it was not useful
at all because smacs and rmacs were always redefining the value
of G0.

These sequences are the equivalents of LS0 and LS1, but for G2 and
G3.

SI (0x0F or ^O) means Shift In, and it selects G1 charset definition,
and SO (0x0E or ^N) means Shift Out, and it selects G0 charset
definition, but st was doing just the inverse.

Thanks mvdan@mvdan.cc for proposing this.

St runs an interactive shell and not a login shell, and it means
that profile is not loaded. The default terminal configuration
in some system is not the correct for st, but since profile is
not loaded there is no way of getting a script configures the
correct values.

St doesn't update the utmp files, this is the job of another
suckless tool, utmp. Utmp also opens a login shell (it is the
logical behaviour when you create a new user record) it is a
good option execute utmp and then get a correct input in
utmp, wtmp and lastlog file, and execute the content of the
profile.

When getting selected text, lines that were wrapped because of length
ought not include the wrapping newline in the selection.

This comes up, for example, when copying a bash command that is long
enough to wrap from the console and pasting it back into the console.
The extra newline breaks it.

Similiarly, changes behavior when trimming whitespace from the end of a
physical line to only do so if the line does not wrap. Otherwise we are
trimming whitespace from the middle of a logical line, which may change
its meaning.

Signed-off-by: Roberto E. Vargas Caballero <k0ga@shike2.com>

This makes any sequence of identical delimiters be considered a single
word in word-snapping mode. This seems more coherent for this mode and
is similar to what xterm does.

Signed-off-by: Roberto E. Vargas Caballero <k0ga@shike2.com>

This simplifies getbuttoninfo() and bpress(), and fixes a bug which made word
snapping behave incorrectly when a delimiter was at the beginning or end of
line.

Signed-off-by: Roberto E. Vargas Caballero <k0ga@shike2.com>

The 'left shift from one' notation of power of two integers is more
expressive than the result.

Signed-off-by: Alexander Huemer <alexander.huemer@xx.vu>
Signed-off-by: Roberto E. Vargas Caballero <k0ga@shike2.com>

We already have a csihandle() function, where is located code about
CSI sequences, so it is logical do the same with ESC sequences.
This change helps to simplify tcontrol(), which has a complex flow
and should be rewritten.

This patch improves the shell selection on execsh and forbid
shell with users don't registered in the passwd file.

DEL character is not thecnically talking a C0 control character,
although it has some common properties with them, so it is useful
for us consider it as C0. Before this patch DEL (\177), was not
ignored as it ought to be.

DEL key has to generate the sequence ^[P in application mode,
because such sequence means delete current character. It implies
that the character sent in keypad mode must be ^? (DEL character).

Signed-off-by: Roberto E. Vargas Caballero <k0ga@shike2.com>

Signed-off-by: Roberto E. Vargas Caballero <k0ga@shike2.com>

The term 'virtual terminal emulator' was broken. There is nothing
virtual about it, it's a terminal emulator.

Signed-off-by: Alexander Huemer <alexander.huemer@xx.vu>
Signed-off-by: Roberto E. Vargas Caballero <k0ga@shike2.com>

Man page was repeating -f option, the second time instead of -i,
and this option was lost in usage() message. This patch also indent
the output of usage().

VT102ID is the sequence that the terminal returns when it is inquired
to identify itself. This value should be configurable in the same
way that another st parameters.

ISCONTROL chechks if a value is between 0 and 0x1f or
between 0x80 and 0x9f. Char signess depends of architecture
and compiler, so in some environment the second case is
always false (and wrong), Techo() calls ISCONTROL with a
char variable, whose type cannot be changed because tpuc()
expects a pointer to char, so the solution is to insert a
cast in the call to ISCONTROL.

Signed-off-by: Roberto E. Vargas Caballero <k0ga@shike2.com>

Signed-off-by: Roberto E. Vargas Caballero <k0ga@shike2.com>

This capability indicates that underscore '_' overstrike current
letter under the cursor. It means that you can generate a
underline 'b' using 'b^H_', because it writes a 'b' then backward
one characther and then overstrike '_'. St has not such behaviour,
so it is an error to have this capability.

tclearregion() was clearing regions using spaces and the current
attributes of the terminal. It was correct with all the modes excepct
underline, because they didn't affect the space character, but in
the case of underline it was a problem. A easy way of seeing this
problem is writing this in the last line of the terminal:

	tput smul ; echo first; tput rmul; echo second; echo third

Fist was underlined, and second and third were not underlined, but
the spaces at the right of second was underlined becuause in the
previous scrool underline mode was set.

Master proccess was not showing any error message when the child
died with an error, and it was very confusing for the user (for
example with incorrect -e command).

One blinking mode is good enough, and two is too much. The best aproach
is emulate the fast blinking with the slow blinking, that it is more
used.
It is removed the flag ATTR_FASTBLINK because it has not a different
meaning of ATTR_BLINK, so it is not needed.

Signed-off-by: Roberto E. Vargas Caballero <k0ga@shike2.com>

According to ECMA-48¹ 8.3.117, an attribute value of 21 is "doubly
underlined", while 22 is "normal colour or normal intensity (neither
bold nor faint)".

Additionally, 25 is "steady (not blinking)", which likely means neither
slow blink nor fast blink.

¹: http://www.ecma-international.org/publications/files/ECMA-ST/Ecma-048.pdf

Signed-off-by: Roberto E. Vargas Caballero <k0ga@shike2.com>

Here is a modest attempt at cleaning it up a little bit. I changed a
few phrases that seemed awkward, but I think the content is the same.

--
Wolfgang Corcoran-Mathe

Signed-off-by: Roberto E. Vargas Caballero <k0ga@shike2.com>