We do not free it until exit anyway.

LIMIT returns value. This fact is already used in x2col and y2row.

It seems that LICENSE files are more common than LICENCE files.
At least this patch makes spelling consistent.

There is no need to check that slide > 0 before executing loop.
If slide <= 0, loop stops immediately.

XFilterEvent usually filters KeyPress events according to input method.
At this point the window is not mapped. The only events that we process
are ConfigureNotify and MapNotify. They should not be filtered by input
method.

It was used only once and its return value was ignored.

control was set, but it was not ever used because it was set
again some lines later.

ascii code may only be checked for characters that have length equal to
1, not width equal to 1

strsep() is not a POSIX function, and it means that every system
needs different defines to expose it. If the prototype of strsep
is not exposed then an ugly int/pointer is done and it might mean
a crash. The best solution?, to remove the strsep and make a custom
loop. If C programmers cannot do this kind of loops without calling
a library function, then maybe we should move all the suckless
software to Java.

Otherwise, pasting the X11 primary selection when empty results an
error and Xlib forcibly exits.

Signed-off-by: Christoph Lohmann <20h@r-36.net>

Some programs can only deal with XA_STRING, and it makes impossible st
be able of copying to them. This patch makes st answer also to XA_STRING,
althought it sends utf8 strings. It is not a problem because moderm
applications must support utf8.

Thanks to Alex Pilon <alp@alexpilon.ca>!

Now there is a distinction between the primary and clipboard selection. With
Mod + Shift + c/v the clipboard is handled. The old Insert behavious does
reside.

http://standards.freedesktop.org/clipboards-spec/clipboards-latest.txt

This was a test to see if anyone actually reads what is submitted. The list of
people not contributing will be valuable in the future.

The unicode long is added to the cache. So when fontconfig does fall back to
the default font (where there is no easy way to find this out from the
pattern) it isn't reloaded.

Use the terminfo delay syntax ($<x>) in our flash capability to avoid
hardcoding a fixed delay in redraw() when called from tsetmode() with
DECSCNM.
We need to turn on the npc capability so that delays are made with
xon/xoff instead of padding characters.

if you keep downsizing your fontsize until either xw.ch or xw.cw gets 0,
st crashes, because there is an unchecked division in cresize.

When MODE_INSERT is set we'd shift characters on the same
line forward before inserting our character in tputc().
This did not account for wide characters where width != 1.
This patch makes it so we shift the correct amount.

In tputc(), when a character wasn't large enough to fit
on the current line, we would call tnewline() to place it on
the next line. Unfortunately, we weren't resetting our glyph
pointer and this caused memory corruption when a
wide character (width == 2) was being written. This patch
resets our glyph pointer after calls to tnewline().

If blinktimeout is set to a value greater than 1000, pselect will
receive a timeout argument with tv_nsec greater than 1E9 (1 sec), and
fail, making st crash. This patch just ensures that the timespec
structure is correctly filled with a value properly decomposed between
tv_sec and tv_nsec.

Reported by JasonWoof on IRC. Thanks!

Trailing whitespaces are trimmed when copying from normal selection and
rectangular selection on lines that have their last character included
or on the left of the selection. It leads to inconsistent behaviors when
copying the exact same text from the left and right window in
applications with vertical splits.
This patch solves this issue by always trimming the selection.

exit() will also unwind the atexit() functions.  This is bad
because if exec*() fails the process is in an inconsistent state.

- POSIX states the SHELL environment variable "... shall represent a
  pathname of the user's preferred command language interpreter." As
  such, st should check for its presence when deciding what shell to
  use; just as HOME can be defined to override one's passwd-defined home
  directory, a user should also be able to override their passwd-defined
  shell using the SHELL environment variable.

Helpful when new Unicode codepoints are not recognized by libc.

I'd like to let st run with its own window when trying to embed it to a window with id 0 instead of exiting with an error.

SHELL must be set to the SHELL of the user, but it was possible set
it to utmp.

The XBell() call currently used when a bell is recieved sends a message
to the X server, but if the X server doesn't know how to sound it,
it just gets ignored and I have not been able to find anywhere in x.org's
code a way to configure the action that the server does.

However, if you use XkbBell() then you can have a process listening for
the XkbBellNotifyEvent that is produced and either alert you visually or
play an audio file or whatever you want as your notification. You have
to include one more header file but the function seems to be compiled as
part of Xlib, at least on my installation.

CustaiCo

These sequences are the equivalents of LS0 and LS1, but for G2 and
G3.

SI (0x0F or ^O) means Shift In, and it selects G1 charset definition,
and SO (0x0E or ^N) means Shift Out, and it selects G0 charset
definition, but st was doing just the inverse.

Thanks mvdan@mvdan.cc for proposing this.

St runs an interactive shell and not a login shell, and it means
that profile is not loaded. The default terminal configuration
in some system is not the correct for st, but since profile is
not loaded there is no way of getting a script configures the
correct values.

St doesn't update the utmp files, this is the job of another
suckless tool, utmp. Utmp also opens a login shell (it is the
logical behaviour when you create a new user record) it is a
good option execute utmp and then get a correct input in
utmp, wtmp and lastlog file, and execute the content of the
profile.

When getting selected text, lines that were wrapped because of length
ought not include the wrapping newline in the selection.

This comes up, for example, when copying a bash command that is long
enough to wrap from the console and pasting it back into the console.
The extra newline breaks it.

Similiarly, changes behavior when trimming whitespace from the end of a
physical line to only do so if the line does not wrap. Otherwise we are
trimming whitespace from the middle of a logical line, which may change
its meaning.

Signed-off-by: Roberto E. Vargas Caballero <k0ga@shike2.com>

This makes any sequence of identical delimiters be considered a single
word in word-snapping mode. This seems more coherent for this mode and
is similar to what xterm does.

Signed-off-by: Roberto E. Vargas Caballero <k0ga@shike2.com>

This simplifies getbuttoninfo() and bpress(), and fixes a bug which made word
snapping behave incorrectly when a delimiter was at the beginning or end of
line.

Signed-off-by: Roberto E. Vargas Caballero <k0ga@shike2.com>

The 'left shift from one' notation of power of two integers is more
expressive than the result.

Signed-off-by: Alexander Huemer <alexander.huemer@xx.vu>
Signed-off-by: Roberto E. Vargas Caballero <k0ga@shike2.com>