Archlinux basic installation configuration scripts
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 

657 lines
18 KiB

;; ┌────────────────────────────────────────────────────────────┐
;; │░█▀█░█▀█░█░░░█░█░█▀▄░█▀█░█▀▄░░░░░░░░░█▀▀░█▀█░█▀█░█▀▀░▀█▀░█▀▀│
;; │░█▀▀░█░█░█░░░░█░░█▀▄░█▀█░█▀▄░░░░▀░░░░█░░░█░█░█░█░█▀▀░░█░░█░█│
;; │░▀░░░▀▀▀░▀▀▀░░▀░░▀▀░░▀░▀░▀░▀░░░░▀░░░░▀▀▀░▀▀▀░▀░▀░▀░░░▀▀▀░▀▀▀│
;; │░Created░By░Aditya░Shakya░@adi1090x░░░░░░░░░░░░░░░░░░░░░░░░░│
;; └────────────────────────────────────────────────────────────┘
;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
;; Global WM Settings
[global/wm]
; Adjust the _NET_WM_STRUT_PARTIAL top value
; Used for top aligned bars
margin-bottom = 0
; Adjust the _NET_WM_STRUT_PARTIAL bottom value
; Used for bottom aligned bars
margin-top = 0
;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
;; Bar Settings
[bar/main]
; Use either of the following command to list available outputs:
; If unspecified, the application will pick the first one it finds.
; $ polybar -m | cut -d ':' -f 1
; $ xrandr -q | grep " connected" | cut -d ' ' -f1
monitor =
; Use the specified monitor as a fallback if the main one is not found.
monitor-fallback =
; Require the monitor to be in connected state
; XRandR sometimes reports my monitor as being disconnected (when in use)
monitor-strict = false
; Tell the Window Manager not to configure the window.
; Use this to detach the bar if your WM is locking its size/position.
override-redirect = false
; Put the bar at the bottom of the screen
bottom = false
; Prefer fixed center position for the `modules-center` block
; When false, the center position will be based on the size of the other blocks.
fixed-center = true
; Dimension defined as pixel value (e.g. 35) or percentage (e.g. 50%),
; the percentage can optionally be extended with a pixel offset like so:
; 50%:-10, this will result in a width or height of 50% minus 10 pixels
width = 100%
height = 30
; Offset defined as pixel value (e.g. 35) or percentage (e.g. 50%)
; the percentage can optionally be extended with a pixel offset like so:
; 50%:-10, this will result in an offset in the x or y direction
; of 50% minus 10 pixels
offset-x = 0
offset-y = 0
; Background ARGB color (e.g. #f00, #ff992a, #ddff1023)
background = ${color.bg}
; Foreground ARGB color (e.g. #f00, #ff992a, #ddff1023)
foreground = ${color.fg}
; Background gradient (vertical steps)
; background-[0-9]+ = #aarrggbb
;;background-0 =
; Value used for drawing rounded corners
; Note: This shouldn't be used together with border-size because the border
; doesn't get rounded
; Individual top/bottom values can be defined using:
; radius-{top,bottom}
radius-top = 0.0
radius-bottom = 0.0
; Under-/overline pixel size and argb color
; Individual values can be defined using:
; {overline,underline}-size
; {overline,underline}-color
;;overline-size = 0
;;overline-color = ${color.ac}
; Values applied to all borders
; Individual side values can be defined using:
; border-{left,top,right,bottom}-size
; border-{left,top,right,bottom}-color
; The top and bottom borders are added to the bar height, so the effective
; window height is:
; height + border-top-size + border-bottom-size
; Meanwhile the effective window width is defined entirely by the width key and
; the border is placed withing this area. So you effectively only have the
; following horizontal space on the bar:
; width - border-right-size - border-left-size
;;border-size = 2
;;border-color = ${color.ac}
; Number of spaces to add at the beginning/end of the bar
; Individual side values can be defined using:
; padding-{left,right}
padding = 0
; Number of spaces to add before/after each module
; Individual side values can be defined using:
; module-margin-{left,right}
module-margin-left = 0
module-margin-right = 0
;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
; Fonts are defined using <font-name>;<vertical-offset>
; Font names are specified using a fontconfig pattern.
; font-0 = NotoSans-Regular:size=8;2
; font-1 = MaterialIcons:size=10
; font-2 = Termsynu:size=8;-1
; font-3 = FontAwesome:size=10
; See the Fonts wiki page for more details
font-0 = "Noto Sans:size=9;3"
font-1 = "Iosevka Nerd Font:size=12;3"
font-2 = "Iosevka Nerd Font:size=16;4"
; Modules are added to one of the available blocks
; modules-left = cpu ram
; modules-center = xwindow xbacklight
; modules-right = ipc clock
modules-left = menu sep2 term web files settings
modules-center =
modules-right = style sep alsa battery network date sep sysmenu
;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
; The separator will be inserted between the output of each module
separator =
; Opacity value between 0.0 and 1.0 used on fade in/out
dim-value = 1.0
; Value to be used to set the WM_NAME atom
; If the value is empty or undefined, the atom value
; will be created from the following template: polybar-[BAR]_[MONITOR]
; NOTE: The placeholders are not available for custom values
wm-name =
; Locale used to localize various module data (e.g. date)
; Expects a valid libc locale, for example: sv_SE.UTF-8
locale =
; Position of the system tray window
; If empty or undefined, tray support will be disabled
; NOTE: A center aligned tray will cover center aligned modules
;
; Available positions:
; left
; center
; right
; none
tray-position = none
; If true, the bar will not shift its
; contents when the tray changes
tray-detached = false
; Tray icon max size
tray-maxsize = 16
; Background color for the tray container
; ARGB color (e.g. #f00, #ff992a, #ddff1023)
; By default the tray container will use the bar
; background color.
tray-background = ${color.background}
; Tray offset defined as pixel value (e.g. 35) or percentage (e.g. 50%)
tray-offset-x = 0
tray-offset-y = 0
; Pad the sides of each tray icon
tray-padding = 0
; Scale factor for tray clients
tray-scale = 1.0
; Restack the bar window and put it above the
; selected window manager's root
;
; Fixes the issue where the bar is being drawn
; on top of fullscreen window's
;
; Currently supported WM's:
; bspwm
; i3 (requires: `override-redirect = true`)
;;wm-restack =
; Set a DPI values used when rendering text
; This only affects scalable fonts
; dpi =
; Enable support for inter-process messaging
; See the Messaging wiki page for more details.
enable-ipc = true
; Fallback click handlers that will be called if
; there's no matching module handler found.
click-left =
click-middle =
click-right =
scroll-up =
scroll-down =
double-click-left =
double-click-middle =
double-click-right =
; Requires polybar to be built with xcursor support (xcb-util-cursor)
; Possible values are:
; - default : The default pointer as before, can also be an empty string (default)
; - pointer : Typically in the form of a hand
; - ns-resize : Up and down arrows, can be used to indicate scrolling
cursor-click =
cursor-scroll =
;; WM Workspace Specific
; bspwm
;;scroll-up = bspwm-desknext
;;scroll-down = bspwm-deskprev
;;scroll-up = bspc desktop -f prev.local
;;scroll-down = bspc desktop -f next.local
;i3
;;scroll-up = i3wm-wsnext
;;scroll-down = i3wm-wsprev
;;scroll-up = i3-msg workspace next_on_output
;;scroll-down = i3-msg workspace prev_on_output
;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
;; Application Settings
[settings]
; The throttle settings lets the eventloop swallow up til X events
; if they happen within Y millisecond after first event was received.
; This is done to prevent flood of update event.
;
; For example if 5 modules emit an update event at the same time, we really
; just care about the last one. But if we wait too long for events to swallow
; the bar would appear sluggish so we continue if timeout
; expires or limit is reached.
throttle-output = 5
throttle-output-for = 10
; Time in milliseconds that the input handler will wait between processing events
;throttle-input-for = 30
; Reload upon receiving XCB_RANDR_SCREEN_CHANGE_NOTIFY events
screenchange-reload = false
; Compositing operators
; @see: https://www.cairographics.org/manual/cairo-cairo-t.html#cairo-operator-t
compositing-background = source
compositing-foreground = over
compositing-overline = over
compositing-underline = over
compositing-border = over
; Define fallback values used by all module formats
;format-foreground =
;format-background =
;format-underline =
;format-overline =
;format-spacing =
;format-padding =
;format-margin =
;format-offset =
; Enables pseudo-transparency for the bar
; If set to true the bar can be transparent without a compositor.
pseudo-transparency = false
;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
;; ┌────────────────────────────────────────────────────────────┐
;; │░█▀█░█▀█░█░░░█░█░█▀▄░█▀█░█▀▄░░░░░░░░░█▀▀░█▀█░█░░░█▀█░█▀▄░█▀▀│
;; │░█▀▀░█░█░█░░░░█░░█▀▄░█▀█░█▀▄░░░░▀░░░░█░░░█░█░█░░░█░█░█▀▄░▀▀█│
;; │░▀░░░▀▀▀░▀▀▀░░▀░░▀▀░░▀░▀░▀░▀░░░░▀░░░░▀▀▀░▀▀▀░▀▀▀░▀▀▀░▀░▀░▀▀▀│
;; │░Created░By░Aditya░Shakya░@adi1090x░░░░░░░░░░░░░░░░░░░░░░░░░│
;; └────────────────────────────────────────────────────────────┘
;;
;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
[color]
;; Active Colors
bg = #232832
bg-alt = #1C2028
fg = #EAEAEA
fg-alt = #9C9C9C
trans = #00000000
white = #FFFFFF
black = #000000
;; Material Colors
red = #e53935
pink = #d81b60
purple = #8e24aa
deep-purple = #5e35b1
indigo = #3949ab
blue = #1e88e5
light-blue = #039be5
cyan = #00acc1
teal = #00897b
green = #43a047
light-green = #7cb342
lime = #c0ca33
yellow = #fdd835
amber = #ffb300
orange = #fb8c00
deep-orange = #f4511e
brown = #6d4c41
grey = #757575
blue-gray = #546e7a
;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
;; ┌────────────────────────────────────────────────────────────────┐
;; │░█▀█░█▀█░█░░░█░█░█▀▄░█▀█░█▀▄░░░░░░░░░█▄█░█▀█░█▀▄░█░█░█░░░█▀▀░█▀▀│
;; │░█▀▀░█░█░█░░░░█░░█▀▄░█▀█░█▀▄░░░░▀░░░░█░█░█░█░█░█░█░█░█░░░█▀▀░▀▀█│
;; │░▀░░░▀▀▀░▀▀▀░░▀░░▀▀░░▀░▀░▀░▀░░░░▀░░░░▀░▀░▀▀▀░▀▀░░▀▀▀░▀▀▀░▀▀▀░▀▀▀│
;; │░Created░By░Aditya░Shakya░@adi1090x░░░░░░░░░░░░░░░░░░░░░░░░░░░░░│
;; └────────────────────────────────────────────────────────────────┘
;;
;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
[module/alsa]
type = internal/alsa
; You can find the different card numbers in `/proc/asound/cards`
;;master-soundcard = default
;;speaker-soundcard = default
;;headphone-soundcard = default
; Default: Master
;;master-mixer = Master
; Optionally define speaker and headphone mixers
; Default: none
;;speaker-mixer = Speaker
; Default: none
;;headphone-mixer = Headphone
; Default: 5
;;interval = 5
; Available tags:
; <label-volume> (default)
; <ramp-volume>
; <bar-volume>
format-volume = <ramp-volume>
format-volume-background = ${color.bg-alt}
format-volume-padding = 2
; Available tags:
; <label-muted> (default)
; <ramp-volume>
; <bar-volume>
format-muted = <label-muted>
format-muted-background = ${color.bg-alt}
format-muted-padding = 2
; Available tokens:
; %percentage% (default)
label-volume = %percentage%%
; Available tokens:
; %percentage% (default
label-muted =
label-muted-foreground = ${color.fg-alt}
ramp-volume-0 =
ramp-volume-1 =
ramp-volume-2 =
ramp-volume-3 =
;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
[module/battery]
type = internal/battery
full-at = 99
; $ ls -1 /sys/class/power_supply/
battery = BAT1
adapter = ACAD
poll-interval = 2
time-format = %H:%M
; Available tags:
; <label-charging> (default)
; <bar-capacity>
; <ramp-capacity>
; <animation-charging>
format-charging = <animation-charging>
format-charging-background = ${color.bg-alt}
format-charging-padding = 2
; Available tags:
; <label-discharging> (default)
; <bar-capacity>
; <ramp-capacity>
; <animation-discharging>
format-discharging = <ramp-capacity>
format-discharging-background = ${color.bg-alt}
format-discharging-padding = 2
; Available tags:
; <label-full> (default)
; <bar-capacity>
; <ramp-capacity>
format-full = <label-full>
format-full-background = ${color.bg-alt}
format-full-padding = 2
; Available tokens:
; %percentage% (default)
; %time%
; %consumption% (shows current charge rate in watts)
label-charging = %percentage%%
; Available tokens:
; %percentage% (default)
; %time%
; %consumption% (shows current discharge rate in watts)
label-discharging = %percentage%%
; Available tokens:
; %percentage% (default)
;label-full = Fully Charged
label-full =
label-full-foreground = ${color.green}
ramp-capacity-0 =
ramp-capacity-1 =
ramp-capacity-2 =
ramp-capacity-3 =
ramp-capacity-4 =
ramp-capacity-5 =
ramp-capacity-6 =
ramp-capacity-7 =
ramp-capacity-8 =
ramp-capacity-9 =
animation-charging-0 =
animation-charging-1 =
animation-charging-2 =
animation-charging-3 =
animation-charging-4 =
animation-charging-5 =
animation-charging-6 =
; Framerate in milliseconds
animation-charging-framerate = 750
;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
[module/date]
type = internal/date
interval = 1.0
time = %I:%M %p
;;time-alt = %B %d, %Y
format = <label>
format-background = ${color.bg-alt}
format-padding = 2
label = %time%
;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
[module/network]
type = internal/network
interface = enp1s0
interval = 1.0
;ping-interval = 3
;;udspeed-minwidth = 5
accumulate-stats = true
unknown-as-up = true
; Available tags:
; <label-connected> (default)
; <ramp-signal>
format-connected = <label-connected>
format-connected-background = ${color.bg-alt}
format-connected-padding = 2
; Available tags:
; <label-disconnected> (default)
format-disconnected = <label-disconnected>
format-disconnected-background = ${color.bg-alt}
format-disconnected-padding = 2
; Available tags:
; <label-connected> (default)
; <label-packetloss>
; <animation-packetloss>
;;format-packetloss = <animation-packetloss> <label-connected>
; Available tokens:
; %ifname% [wireless+wired]
; %local_ip% [wireless+wired]
; %local_ip6% [wireless+wired]
; %essid% [wireless]
; %signal% [wireless]
; %upspeed% [wireless+wired]
; %downspeed% [wireless+wired]
; %linkspeed% [wired]
; Default: %ifname% %local_ip%
;label-connected = 說
label-connected = "%{A1:networkmanager_dmenu &:}說%{A}"
; Available tokens:
; %ifname% [wireless+wired]
; Default: (none)
;label-disconnected = ﲁ
label-disconnected = "%{A1:networkmanager_dmenu &:}ﲁ%{A}"
label-disconnected-foreground = ${color.fg-alt}
; Available tokens:
; %ifname% [wireless+wired]
; %local_ip% [wireless+wired]
; %local_ip6% [wireless+wired]
; %essid% [wireless]
; %signal% [wireless]
; %upspeed% [wireless+wired]
; %downspeed% [wireless+wired]
; %linkspeed% [wired]
; Default: (none)
;label-packetloss = %essid%
;label-packetloss-foreground = #eefafafa
ramp-signal-0 =
ramp-signal-1 =
ramp-signal-2 =
ramp-signal-3 =
ramp-signal-4 =
;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
[module/menu]
type = custom/text
content =
content-background = ${color.light-blue}
content-foreground = ${color.fg}
content-padding = 3
click-left = ~/.config/polybar/panels/scripts/launcher.sh --budgie
click-right = ~/.config/polybar/panels/scripts/launcher.sh --budgie
;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
[module/sysmenu]
type = custom/text
content =
content-background = ${color.bg-alt}
content-foreground = ${color.fg}
content-padding = 3
click-left = ~/.config/polybar/panels/scripts/powermenu.sh --budgie
click-right = ~/.config/polybar/panels/scripts/powermenu.sh --budgie
;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
[module/style]
type = custom/text
content =
content-background = ${color.bg-alt}
content-foreground = ${color.fg}
content-padding = 2
click-left = ~/.config/polybar/panels/scripts/style-switch.sh --budgie
click-right = ~/.config/polybar/panels/scripts/style-switch.sh --budgie
;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
[module/sep]
type = custom/text
content = |
content-foreground = ${color.grey}
content-background = ${color.bg-alt}
content-padding = 1
[module/sep2]
type = custom/text
content = |
content-foreground = ${color.bg}
content-background = ${color.bg}
content-padding = 1
;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
;; Apps
[module/term]
type = custom/text
content = "%{T3}%{T-}"
content-foreground = ${color.green}
content-background = ${color.bg}
content-padding = 3
click-left = termite &
[module/web]
type = custom/text
content = "%{T3}%{T-}"
content-foreground = ${color.orange}
content-background = ${color.bg}
content-padding = 3
click-left = firefox &
[module/files]
type = custom/text
content = "%{T3}%{T-}"
content-foreground = ${color.blue}
content-background = ${color.bg}
content-padding = 3
click-left = thunar &
[module/settings]
type = custom/text
content = "%{T3}煉%{T-}"
content-foreground = ${color.red}
content-background = ${color.bg}
content-padding = 3
click-left = xfce4-settings &
;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_