A LaTeX class to write your proposal. The class is developed for the "Instituto Tecnológico de Morelia" and the course of "Seminario de Investigación 1"
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
This repo is archived. You can view files and clone it, but cannot push or open issues/pull-requests.

10 KiB

The ITMorelia Protocol Class

The present Redme file shows how to work with and compile the Protocol-Class in LaTeX. This class is mainly base in the Thesis-Class. If you want know what sections should be included and its content visit the Wiki of this repository.

Repository structure

Below you can see the repository's contents. The repository is made of 27 files and 2 folders. The folder Chapters includes each .tex file that will be included on your portocol; later you will learn how to included. On the other hand, the folder FrontBackMatter folder includes .tex files related with common chapters/section required on protocols guides like: Titlepage, Abstract, Colophon, Dedication, Glossary, and others; you can include as much as you need.

In the root are files related with the organization and the structure of the Protocol (the thesisStructure.tex and precontent.tex files). Also, in root is included the main file that gives the special format to the document (itmthesis.cls), and finally the Reference.bib file to include a bibliography on your work.

.
├── Chapters
│   ├── A01.tex
│   ├── Chapter01.tex
│   ├── Chapter02.tex
│   └── Chapter0A.tex
├── configuration.tex
├── FrontBackMatter
│   ├── Abstract.tex
│   ├── Bibliography.tex
│   ├── Colophon.tex
│   ├── Contents.tex
│   ├── Declaration.tex
│   ├── Dedication.tex
│   ├── Foreword.tex
│   ├── glossary-entries.tex
│   ├── Glossary.tex
│   ├── Resumen.tex
│   ├── Titleback.tex
│   ├── TitlepageIng.tex
│   └── TitlepageMC.tex
├── itm.jpg
├── itmthesis.cls
├── precontent.tex
├── README.md
├── Reference.bib
├── sepLogo.jpg
├── tecnmBW.png
├── thesisStructure.pdf
└── thesisStructure.tex

The thesisStructure file

The main file in the project is the thesisStructure.tex file. The file is mainly divided on four parts: 1)Configuration, 2)Front Matter, 3) Main contents, and 4) References and 5)Back Matter.

The file contents is show below and detailed explained on next sections.

% Engineering, master and phd degree 
%PROPOSAL(PROTOCOL) format, April 2021, for the 
%**Instituto Tecnológico de Morelia**
%-=-=-=-=-=-=-=-=-=-=-=-=-
% 1)Configuration:
\documentclass[listings,drafting,spanish]{itmthesis} %itm thesis class
\input{configuration}% configuration and packages
\input{FrontBackMatter/glossary-entries}
\begin{document}
% -=-=-=-=-=-=-=-=-=-=-=-=-
% 2)Front Matter:
\pagenumbering{roman} % Roman page numbering 
\input{precontent} %Includes titlepage, dedication, Foreword, abstract, publication, acknowledgement
\include{FrontBackMatter/Contents} % Contents, list of figures/tables/listings and acronyms
\pagenumbering{arabic} % Arabic page numbering
%-=-=-=-=-=-=-=-=-=-=-=-=-
% 3) Thesis Main Contents
\include{Chapters/Chapter01} %Introduction
\cleardoublepage
\include{Chapters/Chapter02} %Results
%-=-=-=-=-=-=-=-=-=-=-=-=-
% Apendix
\appendix
\include{Chapters/Chapter0A} % Appendix A
%-=-=-=-=-=-=-=-=-=-=-=-=-
% 4) References
\cleardoublepage
\include{FrontBackMatter/Bibliography}
%-=-=-=-=-=-=-=-=-=-=-=-=-
% 5) Back Matter
\cleardoublepage
\include{FrontBackMatter/Colophon}
%-=-=-=-=-=-=-=-=-=-=-=-=-
\end{document}
%%% Local Variables:
%%% mode: latex
%%% TeX-master: t
%%% End:

1) Configuration section

Class' options

The code next only refers to the configuration of the itmthesis class:

% 1)Configuration:
\documentclass[listings,drafting,spanish]{itmthesis} %itm thesis class
\input{configuration}% configuration and packages
\input{FrontBackMatter/glossary-entries}

From here the document class, for the Protocol, is defined with \documentclass[<options>]{itmthesis}, and this file determine the way the PDF file is generated by the options. The options defined are:

  • drafting: The options prints the date of compilation at the end of each page. Suitable opton to know that the latest version is on review or writing process.
  • listing: The option loads the listings package and configures the compilation to generates a gray scale listings outputs.
  • spanish: The option enables the babel package to print-out the sectional units on spanish language; otherwise, english will be used.

configuration.tex file

Then, \input command is used to include files with LaTeX commands. Specifically, the configuration file includes all the required packages and its configuration, variable(title, author, university, and so on), and command definitions. The complete code is shown next and sectioned on: 1)Listing configuration, 2)Command and Variable definitions, 3)Short descriptions on Math, 4)Packages, and 5)Text space configuration(indent, interline space, and paragraph space); however, the sections that user should modify are only 2), 4) and 5).

%!TeX root=./thesisStructure.tex
%Add here the packages, variables, definitions, environments and specific elements created only for your thesis

% 1 Code listing setup
%------------------
\RequirePackage{listings}
\RequirePackage{xcolor}
\definecolor{gray97}{gray}{0.97}
\definecolor{gray45}{gray}{0.45}
\newcaptionname{spanish}{\lstlistlistingname}{Sección de Códigos}
\renewcommand{\lstlistingname}{Código}
\renewcommand{\lstlistlistingname}{Códigos}
\lstset{ frame=Ltb,
     framerule=0pt,
     aboveskip=0.2cm,
     framextopmargin=3pt,
     framexbottommargin=3pt,
     framexleftmargin=0.4cm,
     framesep=0pt,
     rulesep=.4pt,
     backgroundcolor=\color{gray97},
     rulesepcolor=\color{black},
     %
     stringstyle=\ttfamily,
     showstringspaces = false,
     %basicstyle=\small\ttfamily,
     %basicstyle=\small,
     commentstyle=\color{gray45}\ttfamily,
     keywordstyle=\bfseries,
     %
     numbers=left,
     numbersep=15pt,
     numberstyle=\tiny,
     numberfirstline = false,
     breaklines=true,
   }

% 2 Commands and variables
% 2.1 Thesis's title page config
%------------------
\newcommand{\myTitle}{Un Título de la Tesis no Muy Complicado y Largo Pero Capaz de Definir Concretamente}
\newcommand{\mySubtitle}{Caso de Estudio a Nivel Maestría}
\newcommand{\myDegree}{Maestría en Ciencias en Ingeniería Electrónica}
% 2.2 Autores:
\newcommand{\myName}{Gerardo Marx Chávez-Campos}
\newcommand{\myNumber}{D01120294}
%\newcommand{\myPartner}{Otro autor}
%----------------
% 2.3 Mesa de revisión
%Director:
\newcommand{\myProf}{Homer Simpson}
%Codirector:
\newcommand{\myOtherProf}{James Clerk Maxwell \xspace}
%Revisor 1:
\newcommand{\mySupervisor}{Piere Simon Laplace\xspace}
%Revisor 2:
\newcommand{\myOtherSupervisor}{Jean-Baptiste Joseph Fourier\xspace}
%--------------
% 2.4 Datos del instituto:
\newcommand{\myFaculty}{Maestría en Ingeniería Electrónica}
\newcommand{\myDepartment}{División de Estudios de Posgrado e Investigación}
\newcommand{\myUni}{Instituto Tecnológico de Morelia}
\newcommand{\myLocation}{Morelia, Michoacán, México}
\newcommand{\myTime}{Abril 2021}
\newcommand{\myThesisVersion}{Rev 2.0}

%---------------------
% 3	USEFUL COMMANDS
%---------------------
\newcommand{\ie}{i.\,e.}
\newcommand{\Ie}{I.\,e.}
\newcommand{\eg}{e.\,g.}
\newcommand{\Eg}{E.\,g.}


%-------------------------
% 4. Required packages for
% figures, plots, subfigures
%-------------------------
\usepackage{float}
\usepackage{subfigure}
\usepackage{tikz}
\usepackage{booktabs} %Beautiful tables
\usepackage{todonotes} %Todo list for comments
\usepackage[version-1-compatibility]{siunitx} %easy writting of SI units
\usepackage{pgfplots}
\pgfplotsset{compat=1.10}
\decimalpoint %Decimal point enable
\usepackage[acronym]{glossaries}
%-------------------------
% 5. setting space for indentation
% space between paragraphs and
% baseline.
% Uncomment to set parameters
%-------------------------
% \setlength{\parindent}{4em}
\setlength{\parskip}{1em}
%\renewcommand{\baselinestretch}{2.0} % Interlineado

Thus, if you require to change the thesis' title modify \myTitle definition on section 2.1. If you need to change your data as an author modify \myname on section 2.2, and the same foe the other options as the reviewing group (2.3), and institution (2.4).

On the other hand, if you want to add new packages to your Protocol, you can added on the main file; the thesisStructure.tex file. However, to maintain a clean code you should add on the configuration file, specifically on section 4.

Finally to set specific values of separation for tabulation, paragraphs or text separation between text(interline), please modify section 5. Here you can use several measurement units as em, cm , in or lines 2(just a number). E.g:

\setlength{\parindent}{4em}
\setlength{\parskip}{1cm}
\renewcommand{\baselinestretch}{2.0} % Interlineado

glossary-entries.tex file

This file includes each entry for acronyms and glossary entries, the syntax of each entry is shown below:

\makeglossaries
\newglossaryentry{latex}
{
    name=latex,
    description={Es un lenguaje de marcado o sintaxis especialmente diseñado para documentos científicos}
}

\newglossaryentry{maths}{
	name=matemáticas,
  description={Las matemáticas son sólo una aproximación a la realidad de la vida}}

\newglossaryentry{formula}{
	name=formula,
	description={A mathematical expression}}


\newacronym{ecm}{ECM}{Error Cuadrático Medio}

\newacronym{ls}{LS}{Mínimos Cuadrados, \textit{Least Squares}}

To learn how to call an entry on the code, see the code on Cahpter02.tex.

2) Front Matter

Explain this:

% 2)Front Matter:
\pagenumbering{roman} % Roman page numbering 
\input{precontent} %Includes titlepage, dedication, Foreword, abstract, publication, acknowledgement
\include{FrontBackMatter/Contents} % Contents, list of figures/tables/listings and acronyms
\pagenumbering{arabic} % Arabic page numbering

Chapters

Apendix

including images

The configuration file

Defined variables

Titlepage

Glossary

References