Readme

This repository is developed to cover the embedded systems lecture at summer school in Jade University.

Issues to solve

• TODO which version of beagles to buy
• I prefer to use the beaglebone black wi-fi, if it is possible to connect them to Jade's internet
• Otherwise the ethernet version is preferred to use with usb-internet sharing
• Install in computer the PuTTY software and some bash option to use.
• TODO Adding to day 1: https://linuxpropaganda.wordpress.com/2018/06/26/create-new-user-in-ubuntu-on-beaglebone-black/

day-1: Introduction to IoT systems and single-board computers (SBC)

Accessing to SBCs by USB

To connect into the SBC, attach the USB cable into the PC. Then, open the terminal and type:

$ ip addr
...
...
en10: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
	ether f4:5e:ab:50:44:89
	inet6 fe80::10a6:8287:252f:1a43/64 secured scopeid 0x16
	inet 192.168.6.1/24 brd 192.168.6.255 en10
...	

you will obtain a lot of enX or awdlx devices, try to search for the new detected devices and specially the one with the ip 192.168.6.1 or 192.168.7.1 that belongs to the BeagleBone devices, and XXX for the Raspberry Pi.

Then, use the SSH protocol, from now ssh, to access the board computer (please change the ip address by your ip device)

$ ssh debian@192.168.6.2
Debian GNU/Linux 10

BeagleBoard.org Debian Buster IoT Image 2022-07-01
Support: https://bbb.io/debian
default username:password is [debian:temppwd]


The programs included with the Debian GNU/Linux system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.

Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.
Last login: Thu Jul  7 07:08:40 2022 from 2806:2f0:5040:8572:7d51:e754:675:cd2a

Accessing the RPi4 by ssh

The SBCs can be accessed by ssh protocol if it is enable (disable by default at raspberry). Thus, we only need to know the SBC's ip or hostname. By default the raspberry Pi 4 is raspberry, but username and password is defined by the user (raspberry Pi imager). Then, to make ssh use:

$ ssh username@hostname.local  

or

$ ssh username@ip

Error connection

When getting the error:

@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
@       WARNING: POSSIBLE DNS SPOOFING DETECTED!          @
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
The ECDSA host key for beaglebone.local has changed,
and the key for the corresponding IP address 2806:103e:5:50f4:3ad2:69ff:fef9:46b4

you have to edit the '.ssh/known_hosts' file, and delete the lien that contains the offending key and the corresponding IP address given the warning.

Basic configuration

Updating the system and installing VIM

Before any further change, please update the system and packages by:

$ sudo apt update
[sudo] password for debian:
Hit:1 http://deb.debian.org/debian buster InRelease
Hit:2 http://deb.debian.org/debian buster-updates InRelease
Hit:3 http://security.debian.org/debian-security buster/updates InRelease
Hit:4 http://repos.rcn-ee.com/debian buster InRelease
Reading package lists... Done
Building dependency tree
Reading state information... Done
17 packages can be upgraded. Run 'apt list --upgradable' to see them.
$ sudo apt list --upgradable
Listing... Done
bb-customizations/unknown 1.20220705.6-0~buster+20220705 all [upgradable from: 1.20220513.0-0~buster+20220513]
bbb.io-kernel-4.19-ti/unknown 1.20220705.0-0~buster+20220705 all [upgradable from: 1.20220628.0-0~buster+20220628]
bbb.io-kernel-tasks/unknown 1.20220705.0-0~buster+20220705 all [upgradable from: 1.20220628.0-0~buster+20220628]
dirmngr/oldstable 2.2.12-1+deb10u2 armhf [upgradable from: 2.2.12-1+deb10u1]
gnupg-l10n/oldstable 2.2.12-1+deb10u2 all [upgradable from: 2.2.12-1+deb10u1]
gnupg-utils/oldstable 2.2.12-1+deb10u2 armhf [upgradable from: 2.2.12-1+deb10u1]
gnupg/oldstable 2.2.12-1+deb10u2 all [upgradable from: 2.2.12-1+deb10u1]
gpg-agent/oldstable 2.2.12-1+deb10u2 armhf [upgradable from: 2.2.12-1+deb10u1]
gpg-wks-client/oldstable 2.2.12-1+deb10u2 armhf [upgradable from: 2.2.12-1+deb10u1]
gpg-wks-server/oldstable 2.2.12-1+deb10u2 armhf [upgradable from: 2.2.12-1+deb10u1]
gpg/oldstable 2.2.12-1+deb10u2 armhf [upgradable from: 2.2.12-1+deb10u1]
gpgconf/oldstable 2.2.12-1+deb10u2 armhf [upgradable from: 2.2.12-1+deb10u1]
gpgsm/oldstable 2.2.12-1+deb10u2 armhf [upgradable from: 2.2.12-1+deb10u1]
gpgv/oldstable 2.2.12-1+deb10u2 armhf [upgradable from: 2.2.12-1+deb10u1]
libcpupower1/oldstable 4.19.249-2 armhf [upgradable from: 4.19.235-1]
linux-cpupower/oldstable 4.19.249-2 armhf [upgradable from: 4.19.235-1]
linux-libc-dev/oldstable 4.19.249-2 armhf [upgradable from: 4.19.235-1]

and then, make the upgrade of all required packages

$ sudo apt upgrade
Reading package lists... Done
Building dependency tree
Reading state information... Done
Calculating upgrade... Done
The following packages will be upgraded:
  bb-customizations bbb.io-kernel-4.19-ti bbb.io-kernel-tasks dirmngr gnupg gnupg-l10n gnupg-utils gpg gpg-agent
    gpg-wks-client gpg-wks-server gpgconf gpgsm gpgv libcpupower1 linux-cpupower linux-libc-dev
	17 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
	Need to get 9908 kB of archives.
	After this operation, 69.6 kB of additional disk space will be used.
	Do you want to continue? [Y/n] Y
	...
	...
	...

now we can start to install updated packages, lets try to install the VIM package to use as our main source and text editor:

$ sudo apt install vim
Reading package lists... Done
Building dependency tree... Done
Reading state information... Done
The following additional packages will be installed:
  libgpm2 vim-runtime
Suggested packages:
  gpm ctags vim-doc vim-scripts
The following NEW packages will be installed:
  libgpm2 vim vim-runtime
0 upgraded, 3 newly installed, 0 to remove and 0 not upgraded.
Need to get 7650 kB of archives.
After this operation, 36.4 MB of additional disk space will be used.
Do you want to continue? [Y/n] y
Get:1 http://deb.debian.org/debian bullseye/main arm64 libgpm2 arm64 1.20.7-8 [35.9 kB]
Get:2 http://deb.debian.org/debian bullseye/main arm64 vim-runtime all 2:8.2.2434-3+deb11u1 [6226 kB]
Get:3 http://deb.debian.org/debian bullseye/main arm64 vim arm64 2:8.2.2434-3+deb11u1 [1388 kB]
Fetched 7650 kB in 0s (17.0 MB/s)
perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
LANGUAGE = (unset),
LC_ALL = (unset),
LC_CTYPE = "UTF-8",
LANG = "en_GB.UTF-8"
are supported and installed on your system.
perl: warning: Falling back to a fallback locale ("en_GB.UTF-8").
	  .
	  .
	  .

Changing the bb's or rpi4's hostname

First edit the /etc/hostname file by:

$ sudo vim /etc/hostname

change the first and only line in this file to reflect your new hostname.

Then, edit the /etc/hosts file:

127.0.0.1       localhost
127.0.1.1       hostname.localdomain    hostname

# The following lines are desirable for IPv6 capable hosts
::1     localhost ip6-localhost ip6-loopback
ff02::1 ip6-allnodes
ff02::2 ip6-allrouters

change the second line in both hostname (127.0.1.1) instances for your new hostanme (must be the same previously defined).

Finally, reboot your beagle or raspberry device.

Changing the user's password

To change the default user's password use:

$ passwd
Changing password for debian.
Current password: temppwd
New password: xxxxxxx
...

Time and internet access

We previously have checked the internet access to our SBC-devices, now, let us use the internet to sync our time zone and locales for the further sync of commits in the git system. Thus, let us check the time at the device by:

$ systemctl status time-sync.target
time-sync.target - System Time Synchronized
	Loaded: loaded (/lib/systemd/system/time-sync.target; static; vendor preset: enabled)
	Active: active since Wed 2022-07-06 22:06:43 CDT; 14min ago
	Docs: man:systemd.special(7)

if time is wrong use the next command and follow the instructions:

$ sudo dpkg-reconfigure tzdata

the, the system will have the correct time now.

If locale settings fail use:

$ sudo dpkg-reconfigure locales

and choose your desired locales, it is recommended to use international english with UTF-8 compatibility.

Oh My Bash

Next, to make easier work with the bash system let us install the oh-my-bash tool:

$ bash -c "$(curl -fsSL https://raw.githubusercontent.com/ohmybash/oh-my-bash/master/tools/install.sh)"

you can go deeper and customize the themes and plugins at oh-my-bash

SSH Key pairs

To create key pairs use:

$ ssh-keygen -t ed25519 -C "your_email@example.com"
...
...
...

then copy the *.pub file generated:

$ ssh-copy-id -i ~/.ssh/id_ed25519.pub debian@bbb-marx.local
/usr/bin/ssh-copy-id: INFO: Source of key(s) to be installed: "/Users/gmarx/.ssh/id_ed25519.pub"
/usr/bin/ssh-copy-id: INFO: attempting to log in with the new key(s), to filter out any that are already installed
/usr/bin/ssh-copy-id: INFO: 1 key(s) remain to be installed -- if you are prompted now it is to install the new keys
Debian GNU/Linux 10

BeagleBoard.org Debian Buster IoT Image 2022-07-01
Support: https://bbb.io/debian
default username:password is [debian:temppwd]

debian@bbb-marx.local's password:

Number of key(s) added:        1

Now try logging into the machine, with:   "ssh 'debian@bbb-marx.local'"
and check to make sure that only the key(s) you wanted were added.